-
Excellent for impedance matching termination of your average short-run SCSI cables. Take note, however, that terminators designated as 'Passive' only regulate the impedance of the line as opposed to the more efficient 'Active' terminators which use a voltage regulator to optimize signal voltage.
- HP68 Male
-
Probably the most common SCSI connector used today. Used on all SCSI Wide applications and some old DEC single-ended SCSI
this connector provides a highly secure connection. Used for scsi-3 applications: scanner, removable
storage drive, controller, external cdr/cdrw, ultra/2. The HP68 connector has
68-pins arranged in two rows one on top of the other. The top row has 34 pins and
the lower row has 34 pins.
- SCSI 3 - Before Adaptec and later SCSITA codified the terminology, the first parallel SCSI devices
that exceeded the SCSI-2 capabilities were simply designated SCSI-3. These devices, also
known as Ultra SCSI and fast-20 SCSI, were introduced in 1992. The bus speed doubled again
to 20 MB/s for narrow (8 bit) systems and 40 MB/s for wide. The maximum cable length
stayed at 3 meters but ultra SCSI developed an undeserved reputation for extreme sensitivity
to cable length and condition (faulty cables, connectors or terminators were often to
blame for instability problems).
|
SC11
