CISCO1005-CH – Ethernet/Serial Router with DB60, Sync / Async

CISCO1005-CH Information

CISCO 1005 Router

The Cisco 1005 router is a small, desktop router that connects small, remote sites with Ethernet LANs to synchronous WANs at speeds up to 2.048 Mbps or to asynchronous WANs at speeds up to 115.2 kbps

The Cisco 1005 router includes the following features:

  • One Ethernet 10BaseT port (RJ-45)
  • One console port (RJ-45)
  • Console cable kit and supply
  • One serial port (DB-60) that supports:
    • Permanent and switched synchronous WAN links up to 2.048 Mbps
    • Asynchronous WAN links up to 115.2 kbps
  • One slot for an optional PCMCIA Flash memory card
  • Software boot using TFTP over an Ethernet LAN connection or by using the optional Flash memory card
  • IP, IPX and AppleTalk routing
  • Transparent bridging (over synchronous WAN links only)
  • Support for the following synchronous WAN encapsulations: HDLC, LAPB, Frame Relay, SMDS and X.25
  • Support for the following asynchronous WAN encapsulations: PPP and SLIP
  • Router management through the console port or over the network using SNMP or Telnet
  • AutoInstall for downloading configuration files automatically over a WAN


Cisco1005Diagram.gifEthernet/Serial Router with DB60, Sync / Async

Custom Cables may vary slightly from picture shown.


PacificCable.com also sells:
MEM-CIP-32M-AP - (7000 Channel Interface Processor) 32 MB DRAM upgrade Cisco Approved (Misc) - $123.00 Qty:
200-582
200-582 - DSS Dual Hughes-type LNB - $45.00 Qty:
F28-A20RB
F28-A20RB - 20 Conductor, 28 AWG, .05 (1.27mm) Spacing, 100 Ft. - $138.00 Qty:
SCS3A
SCS3A - SCSI, Seven Drives, 70 Inch - $10.50 Qty:
USBABMM-15
USBABMM-15 - USB AB Male / Male 15 Ft. (USB 2.0) - $8.00
Qty:
© 2011 Pacific Custom Cable, Inc.