BP8016P – 1 Channel Passive Video Transceiver. Special Order. Non-Returnable.

BP8016P Information
Part Number Description Price Order
BP8016P 1 Channel Passive Video Transceiver. Special Order. Non-Returnable. $32.00
Qty:

1 Channel Passive Video Transceiver. Special Order. Non-Returnable.

Your CCTV video over cat5 installation has never been easier and more cost effective. Balun is the key component that allows you to transmit VGA, RGB, YPbPr. YCbCr, S-Video and Composite video or audio over Cat5. It's important to use video baluns when sending video over Cat5 since the impedance specifications of Cat5, Cat5e and Cat6 are 100 ohms. Video requires 75 ohm impedance and you'll introduce artifacts to your video without a balun. Basically, if there's an impedance mismatch the signal will be reflected from the receiver back to the transmitter causing delays in the signal transmission; the delays have a ghosting effect on the picture.

  • Video Input: 1Vp-p, 75 Ohms
  • RJ-45 Output: Terminal
  • Transmission Distance: 600M(B/W), 400M(Color)
  • Cable: Twisted Pair CAT5
  • Power: Not Required
  • Transmit a full motion monochrome video signal up to 600 meters, color video signal up to 400 meters
  • Distance up to 1km when used with an active receiver
  • Passive, no power required
  • Eliminate Coaxial Cable


BP8016P 1 Channel Passive Video Transceiver. Special Order. Non-Returnable.
Part Number Description Price Order
BP8016P 1 Channel Passive Video Transceiver. Special Order. Non-Returnable. $32.00
Qty:
PacificCable.com also sells:
RPA-2486
RPA-2486 - Reverse Polarity SMA Female (Jack) To Right Angle Male (Plug) Adapter - $6.50 Qty:
251-330
251-330 - 3 Pin XLR Female (Jack) to 1/4 Inch Mono Male (Plug) - $4.50 Qty:
EC9-14
EC9-14 - 14 FT. Category 5E RJ45 Shielded (STP) Booted Grey - $9.00 Qty:
201-271
201-271 - 3-Way balanced 1GHz 130dB F-Splitter - $6.00 Qty:
960-10-009
960-10-009 - Kentrox 10 Ft. BNC Male (Plug) To Female (Jack) (Custom) - $8.00 Qty:
© 2011 Pacific Custom Cable, Inc.