202-154 – 5x5x4 Cascade Multiswitch Sheet Metal

202-154 Information
Part Number Description Price Order
202-154 5x5x4 Cascade Multiswitch Sheet Metal $65.00
Qty:

Mouse over thumbnails to view larger images.

A multiswitch takes the input from both of the LNB's (both cables from a dual LNB dish HAVE to be connected to the multiswitch)...it then locks one of the LNB's to always look at the even transponders and the other LNB to always look at the odd transponders. This is why a multiswitch only works with Dual LNBs and not single LNB's. The switch then has multiple outputs to receivers (4,8,etc). When you connect the receiver to the multiswitch, the switch determines which of the two LNB's the receiver needs to look at depending if it needs to view odd or even transponders. When you change the channel, the switch then swaps your connection to the other LNB when needed. With a multiswitch, the LNB's never change which side they are looking at.

What is a cascadable multiswitch?
The receiver will send a 22khz tone to tell the multiswitch that it wants the 119 degree satellite. This tone is only used by the multiswitch and is not sent back up to the LNB's....if you have two 4xn switches connected or a 4xn multiswitch connected to the built in multiswitch on a dish, the "2nd" one will never tell the "1st" one that it needs to see the 119 so the receivers connected to the "2nd" one would ONLY see the 101 satellite.

There are switches designated as "cascadable" that WILL send that 22khz tone upstream, thereby allowing you to connect it in series with another multiswitch (such as a built in one on the dish).

SkySwitcher 22KHz Cascade Multiswitches
  • Designed for MDU networks over 20 subscribers
  • Multiswitch allows independent operation of multiple satellite receivers using a single dish
  • Combines 4 satellite LNB inputs and 1 off-air TV antenna input to any satellite receiver
  • Routes any LNB input to any output using 13-14V vertical or 17-18V horizontal polarities and 0-22KHz set at the receiver
  • Suitable for HDTV and DirectTV Para-Todos Feeds
  • SMD Multiple-Layered Printed Circuit Board Design
  • High Performance Pin-Diode Signal Switching
  • Tin-Plated Steel Housing
  • Plastic Mounting Feet
  • Precision Machined F-Connector Threads
  • Impedance 75Ohms
  • Current Pass 1500mA max
  • DC Current Consumption 25mA
  • Terrestrial Ports Frequency 5-862MHz
  • Satellite Port Frequency 950-2200MHz
  • Isolation 30dB min
  • Tap Loss 16-23dB
  • Trunk Loss 3-5dB
  • Return Loss 8-13dB
  • Supplied with Protective F-Port Plastic Caps
  • 5-1/2 inches 2 x 4 inches h x 1-7/8 inches d


202-154 5x5x4 Cascade Multiswitch Sheet Metal
Part Number Description Price Order
202-154 5x5x4 Cascade Multiswitch Sheet Metal $65.00
Qty:
PacificCable.com also sells:
255-814CL
255-814CL - 25 Ft. 14-Gauge Speaker Wire Coiled Clear - $16.00 Qty:
255-264
255-264 - 25 Ft. 3.5mm Stereo Male (Plug) to 3.5mm Stereo Male (Plug) - $16.00 Qty:
255-020
255-020 - 6-Inch 2 RCA Male (Plug) To RCA Male (Plug) - $7.00 Qty:
BL2011C
BL2011C - Teddy Bear Hidden Wireless Video Camera. Color. CCD Camera. Special Order. Non-Returnable. - $450.00 Qty:
RPA-2452
RPA-2452 - Reverse Polarity SMA Crimp Male (Plug) Connector With Female Pin For RG58/U (10 Pack) - $30.00 Qty:
© 2011 Pacific Custom Cable, Inc.