201-356 – 6db 1GHz Plate-Mt Directional Coupler

201-356 Information
Part Number Description Price Order
201-356 6db 1GHz Plate-Mt Directional Coupler $4.50

Mouse over thumbnails to view larger images.

Directional couplers, or Taps as they are sometimes called, are used to extract a small portion of the signal from the distribution cable to feed subscribers taps, while maintaining the proper characteristic impedance of the ditribution cable. A directional coupler has three important parameters to check: insertion loss, isolation, and tap loss.

Tap Loss - The most important parameter of a directional coupler is the tap loss. Tap loss is how much lower the signal level at the tap output is, compared to the signal level at the input. Common tap loss values range from 3 dB to 28 dB. Directional couplers are placed at various locations throughout a distribution system based upon the required tap loss and signal level needed. If, for example, the signal level on a line is 28 dBm V, a directional coupler having a tap loss of 28 dB would be used to provide the signal of 0dBmV needed for a subscriber tap.

Insertion Loss - The insertion loss of a directional coupler should be quite small, typically about 1.5 dB.

Isolation - The isolation of a directional coupler becomes greater as the tap loss increases, with a typical isolation of 20 dB for a 3 dB directional coupler.

5-1000MHz 75Ohm Directional Couplers.
  • 90db min RFI Shielding
  • Epoxy-Sealed Back-Cover
  • High Isolation of Reflected Signals
  • Printed-Board Circuitry
  • 2-Way System Compatible
  • Anti-Corrosion Plating
  • Zinc-Alloy Cast Housing
  • 3/8 inch Precision Machined F-Connector Threads
  • Capacitor-Coupled DC Power Blocked All Ports

201-356 6db 1GHz Plate-Mt Directional Coupler
1GHz-Directional-Couplers-Specifications 6db 1GHz Plate-Mt Directional Coupler
Part Number Description Price Order
201-356 6db 1GHz Plate-Mt Directional Coupler $4.50
PacificCable.com also sells:
PT-JGN3-8X8 - PCB Side Entry RJ45 3 Port Gang Jacks 50 Pack - $155.00 Qty:
MEM-SPE-512D-AP - 512MB SDRAM Module Cisco Approved - $927.00 Qty:
BN25G-14 - 14 Ft. Booted Category 5 Patch Cable. RJ45 Data Grade Equipment Cable. DEC Cable. (EC6E-14) - $3.80Choose color:
MEM3800-128CF-AP - 128MB Flash Card Cisco Approved - $132.00 Qty:
AM7-10 - 10 ft. Mac - Asynchronous Modem, Mini Din 8 Male - D25 Male - $9.50 Qty:
© 2011 Pacific Custom Cable, Inc.