201-306 – 6db 1GHz T-Type Directional Coupler

201-306 Information
Part Number Description Price Order
201-306 6db 1GHz T-Type Directional Coupler $4.50

Mouse over thumbnails to view larger images.

Directional couplers, or Taps as they are sometimes called, are used to extract a small portion of the signal from the distribution cable to feed subscribers taps, while maintaining the proper characteristic impedance of the ditribution cable. A directional coupler has three important parameters to check: insertion loss, isolation, and tap loss.

Tap Loss - The most important parameter of a directional coupler is the tap loss. Tap loss is how much lower the signal level at the tap output is, compared to the signal level at the input. Common tap loss values range from 3 dB to 28 dB. Directional couplers are placed at various locations throughout a distribution system based upon the required tap loss and signal level needed. If, for example, the signal level on a line is 28 dBm V, a directional coupler having a tap loss of 28 dB would be used to provide the signal of 0dBmV needed for a subscriber tap.

Insertion Loss - The insertion loss of a directional coupler should be quite small, typically about 1.5 dB.

Isolation - The isolation of a directional coupler becomes greater as the tap loss increases, with a typical isolation of 20 dB for a 3 dB directional coupler.

5-1000MHz 75Ohm Directional Couplers.
  • 90db min RFI Shielding
  • Epoxy-Sealed Back-Cover
  • High Isolation of Reflected Signals
  • Printed-Board Circuitry
  • 2-Way System Compatible
  • Anti-Corrosion Plating
  • Zinc-Alloy Cast Housing
  • 3/8 inch Precision Machined F-Connector Threads
  • Capacitor-Coupled DC Power Blocked All Ports

201-306 6db 1GHz T-Type Directional Coupler
1GHz-Directional-Couplers-Specifications 6db 1GHz T-Type Directional Coupler
Part Number Description Price Order
201-306 6db 1GHz T-Type Directional Coupler $4.50
PacificCable.com also sells:
F28-A64RB - 64 Conductor, 28 AWG, .05 (1.27mm) Spacing, 100 Ft. - $378.00 Qty:
EX8-6 - 6 Ft. MD4 Male To MD4 Male ADB Replacement Cable, Molded - $16.00 Qty:
USBAMRAF-3IN - USB A Male Right Angle to USB A Female 3 Inch Adapter (USB 2.0) - $8.00 Qty:
7660-524 - DB25 RS-530 To RJ45 RS-422 Converter. DB25 Male To RJ45 Female. Carrier Access Cable. (Custom) - $6.00 Qty:
MEM3640-4X32D - Cisco 3640 128MB DRAM (4X32 MB DRAM SIMMS) Cisco Systems Equivilent (Misc) - $174.00 Qty:
© 2011 Pacific Custom Cable, Inc.