![]() Quality Connections Since 1993 |
Custom RF Cable Quick Tool |
SHIPPING ADDRESS: 4170 B Place NW, Auburn, WA 98001 USA View Map |
|
|||
EMAIL: Sales, Customer Service or Webmaster | PHONE: 800-931-3133 or 253-373-0800 | FAX: 253-373-0100 | |||||
Office Hours: 9:00am - 5:00pm PST Monday - Friday | Order Online: 24 Hours | Will Call: 10:00am - 4:00pm PST Monday - Friday |
![]() ![]() ![]() ![]() | |||||
![]() | ||||||
You are here:
PacificCable.com ![]() |
||||||
![]() |
Cisco approved GBIC
GBIC - Gigabit Interface Converter
The GBIC is a hot-swappable input/output device that plugs into a Gigabit ethernet port, linking the module port with the fiber-optic network and can be installed in the Catalyst 6000, Catalyst 5000, and Catalyst 4000 family Gigabit Ethernet ports that accept GBICs.
CIS-WS-G5484
The WS-G5484 (1000BASE-SX) operates on ordinary multimode fiber (MMF) link spans of up to 1804 feet (550 meters) in length.
CIS-WS-G5486
The WS-G5486 GBIC (1000BASE-LX/LH) interfaces fully comply with the IEEE 802.3z 1000BASE-LX standard. However, their higher optical quality allows them to reach 10 km over single-mode fiber (SMF) versus the 5 km specified in 802.3z.
When using an LX/LH GBIC with a 62.5-micron diameter MMF, you must install a mode conditioning patch cord (CAB-GELX-625 or Equivilent) between the GBIC and the MMF cable on both the transmit and recieve ends of the link in the following situations:
- Less than 328 feet (100 meters). When illuminating short lengths of MMF with an LX/LH GBIC, the mode-conditioning patch cord reduces the amount of optical power coupled into the MMF. Excessive power can saturate the LX/LH receiver causing an elevated bit error rate (BER).
- Greater than 984 feet (300 meters). When illuminating long lengths of MMF with an LX/LH BGIC, the mode-conditiong patch cord offsets the laser light to reduce the possibility of differential mode delay.