Quality Cables & Networking Supplies	Search All Words Search Exact Phrase Search Any Word Search by Cable Connectors	SHIPPING ADDRESS: 4170 B Place NW, Auburn, WA 98001  USA View Map		MAILING ADDRESS: P.O. Box 8026, Bonney Lake, WA 98391   USA
EMAIL: Sales, Customer Service or Webmaster		PHONE: 800-931-3133 or 253-373-0800 | FAX: 253-373-0100
Hours: 8:00am - 5:00pm PST Monday - Friday
You are here: PacificCable.com RFC 1661

RFC 1661

Network Working Group
Request for Comments: 1661
STD: 51
Obsoletes: 1548
Category: Standards Track

W. Simpson, Editor
Daydreamer
July 1994

Status of this Memo

This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.

Abstract

The Point-to-Point Protocol (PPP) provides a standard method for transporting multi-protocol datagrams over point-to-point links. PPP is comprised of three main components:

1. A method for encapsulating multi-protocol datagrams.

2. A Link Control Protocol (LCP) for establishing, configuring, and testing the data-link connection.

3. A family of Network Control Protocols (NCPs) for establishing and configuring different network-layer protocols.

This document defines the PPP organization and methodology, and the PPP encapsulation, together with an extensible option negotiation mechanism which is able to negotiate a rich assortment of configuration parameters and provides additional management functions. The PPP Link Control Protocol (LCP) is described in terms of this mechanism.

Table of Contents

• 1. Introduction
  • 1.1. Specification of Requirements
  • 1.2. Terminology
• 2. PPP Encapsulation
• 3. PPP Link Operation
  • 3.1. Overview
  • 3.2. Phase Diagram
  • 3.3. Link Dead (physical-layer not ready)
  • 3.4. Link Establishment Phase
  • 3.5. Authentication Phase
  • 3.6. Network-Layer Protocol Phase
  • 3.7. Link Termination Phase
• 4. The Option Negotiation Automaton
  • 4.1. State Transition Table
  • 4.2. States
  • 4.3. Events
  • 4.4. Actions
  • 4.5. Loop Avoidance
  • 4.6. Counters and Timers
• 5. LCP Packet Formats
  • 5.1. Configure-Request
  • 5.2. Configure-Ack
  • 5.3. Configure-Nak
  • 5.4. Configure-Reject
  • 5.5. Terminate-Request and Terminate-Ack
  • 5.6. Code-Reject
  • 5.7. Protocol-Reject
  • 5.8. Echo-Request and Echo-Reply
  • 5.9. Discard-Request
• 6. LCP Configuration Options
  • 6.1. Maximum-Receive-Unit (MRU)
  • 6.2. Authentication-Protocol
  • 6.3. Quality-Protocol
  • 6.4. Magic-Number
  • 6.5. Protocol-Field-Compression (PFC)
  • 6.6. Address-and-Control-Field-Compression (ACFC)
• Security Considerations
• References
• Acknowledgements
• Chair's Address
• Editor's Address

• Original text document
• Complete HTML RFC (TAR, TGZ, or ZIP format)