3.6. Network-Layer Protocol Phase
PacificCable.com
Quality Cables & Networking Supplies

Search by Cable Connectors
SHIPPING ADDRESS:
4170 B Place NW,
Auburn, WA 98001  USA
MAILING ADDRESS:
P.O. Box 8026,
Bonney Lake, WA 98391   USA
EMAIL: Sales, Customer Service or Webmaster PHONE: 800-931-3133 or 253-373-0800 | FAX: 253-373-0100
Hours: 8:00am - 5:00pm PST Monday - Friday View CartManage icWalletConnection ForumBookstore
You are here: PacificCable.com Arrow 3.6. Network-Layer Protocol Phase
Connected: An Internet Encyclopedia
3.6. Network-Layer Protocol Phase

Up: Connected: An Internet Encyclopedia
Up: Requests For Comments
Up: RFC 1661
Up: 3. PPP Link Operation
Prev: 3.5. Authentication Phase
Next: 3.7. Link Termination Phase

3.6. Network-Layer Protocol Phase

3.6. Network-Layer Protocol Phase

Once PPP has finished the previous phases, each network-layer protocol (such as IP, IPX, or AppleTalk) MUST be separately configured by the appropriate Network Control Protocol (NCP).

Each NCP MAY be Opened and Closed at any time.

Implementation Note:

After a NCP has reached the Opened state, PPP will carry the corresponding network-layer protocol packets. Any supported network-layer protocol packets received when the corresponding NCP is not in the Opened state MUST be silently discarded.

Implementation Note:

During this phase, link traffic consists of any possible combination of LCP, NCP, and network-layer protocol packets.


Next: 3.7. Link Termination Phase

Connected: An Internet Encyclopedia
3.6. Network-Layer Protocol Phase